Project Background
Mr. Thomas first contacted CM Roofing Pros about a roof repair at 2030 Cobble Meadow Ln, Rosenberg, TX 77469, USA. During our call, we offered to inspect the property for storm damage that might qualify for an insurance claim. Upon inspection, we confirmed that there was no storm damage, but we did find extensive maintenance issues and, more importantly, the underlying problem: the home had been built with generic, non-branded builder-grade shingles. These low-quality shingles had failed prematurely, allowing water intrusion across multiple slopes and valleys.
Scope Evolution
The original scope was limited to repairing a single slope with rotted decking. As work progressed, additional issues emerged across other slopes and valleys. After multiple change orders and continued discoveries of widespread water penetration, the property owner and our team agreed that a full roof replacement was the only long-term solution.
We initially offered financing options through our system, but Mr. Reeves ultimately secured his own loan to move forward with the replacement.
Roof Specifications (from Roofgraf Report)
-
Total Roof Area: ~3,005 sq. ft. (30 squares before waste)
-
Predominant Pitch: 8/12
-
Facets: 19 roof sections
-
Ridge Length: 62.33 ft
-
Hip Length: 166.83 ft
-
Valleys: 96.50 ft
-
Eaves: 229.33 ft
-
Step Flashing: 82.83 ft
Materials Installed
-
Shingles: TAMKO Heritage 30-Year Laminate Shingles (Rustic Black) – chosen for their durability, dimensional appearance, and limited lifetime manufacturer’s warranty.
-
Starter Shingles: Tamko Starter strips for enhanced wind uplift resistance.
-
Underlayment:
-
Tamko Synthetic Underlayment – full-deck coverage as a moisture barrier.
-
GAF StormGuard Ice & Water Shield – installed in valleys and flashing zones for maximum leak prevention.
-
-
Hip & Ridge Caps: Reinforcement at high-stress roof transitions.
-
Flashing & Edges: Black 2×2 drip edge flashing and new pipe jack flashings/vents.
-
Fasteners: 1 1/4″ Coil Nails for shingles and 1″ Plastic Cap Nails for underlayment.
Work Performed
-
Initial Tear-Off & Disposal of all existing shingles, ridge caps, and underlayment.
-
Decking Repairs: Replacement of rotted OSB plywood across multiple slopes and valleys.
-
Underlayment Installation: Synthetic underlayment over the full deck and StormGuard in valleys.
-
Shingle Installation: TAMKO Heritage shingles installed per manufacturer guidelines with reinforced fastening patterns.
-
Flashing & Ventilation: Replacement and painting of pipe jack flashings, gooseneck exhaust vents, and step flashing.
-
Edge Protection: New drip edge installed along all eaves and rakes.
-
Final Cleanup & Inspection: Full magnetic sweep, gutter cleaning, and audit by a Quality Control Officer.
Warranty Coverage
-
CM Roofing Pros Labor Warranty: 5 years against defects in flashing, metal work, underlayment, fasteners, valleys, and penetrations.
-
Manufacturer’s Warranty (TAMKO Heritage): Limited lifetime product warranty, Class A fire resistance, 130 MPH wind rating, and 10-year algae cleaning warranty.
Documentation
The project was fully documented with progress photos, final shots, and drone video footage stored in CompanyCam and Google Drive. This visual record showcases the roof transformation and provides additional transparency for the homeowner.
Outcome
What began as a repair call evolved into a full roof replacement after discovering extensive failures caused by builder-grade shingles. The new TAMKO Heritage system has restored complete protection to the home while enhancing curb appeal with its Rustic Black finish.
Mr. Thomas expressed his satisfaction with the work and has promised to leave a review (pending). His home is now backed by both CM Roofing Pros’ 5-year labor warranty and TAMKO’s manufacturer warranty, ensuring peace of mind for years to come.
